-
High quality 1/2" wire core flip line ads another element of safety for the climber. Install a rope grab of your to make adjusting the length of your lanyard easy. Comes with a steel swivel locking rope snap. -
Out of stock
Braided Safety Blue®trendsetter among 16-strand climbing ropes. It combines features that ensure unparalleled safety, ergonomics, and durability. The blue core of Braided Safety Blue® is exposed when the rope suffers deep damage or has worn down to a certain point so that it should be discarded. As a full 12.7 mm rope, Braided Safety Blue® goes easy on your hands. This allows you to work longer and avoid injury. Where durability is concerned, Braided Safety Blue‘s® design and detailed workmanship are unrivaled. The additional step of plying the yarns in the strands results in a firmer, rounder, and more durable strand. Other 16-strand ropes skip this step, which makes them more susceptible to abrasion and thus also shortens their life spans. -
Out of stock
Braided Safety Blue®trendsetter among 16-strand climbing ropes. It combines features that ensure unparalleled safety, ergonomics, and durability. The blue core of Braided Safety Blue® is exposed when the rope suffers deep damage or has worn down to a certain point so that it should be discarded. As a full 12.7 mm rope, Braided Safety Blue® goes easy on your hands. This allows you to work longer and avoid injury. Where durability is concerned, Braided Safety Blue‘s® design and detailed workmanship are unrivaled. The additional step of plying the yarns in the strands results in a firmer, rounder, and more durable strand. Other 16-strand ropes skip this step, which makes them more susceptible to abrasion and thus also shortens their life spans. -
10mm Armor Prus hitch cord and an aluminum CT snap. Used to adjust the length of your positioning lanyard. -
10mm Ocean Polyster hitch cord and an aluminum CT snap. Used to adjust the length of your positioning lanyard. -
11 mm Aramid Static Flipline Core/Sheath: Nylon/Technora® & Spectra® This 11 mm rope features our unique Technora sheath, Dyneema inner jacket and nylon core. By combining the abrasion-resistant sheath over a high-strength inner jacket and pliable core, we have created a flipline that is strong and durable, yet still supple enough to move and position easily. MBS: 5,418 Lbs -
Out of stock
KIT CONTENTS:- 15′ Tritech Eye to Eye: TriTech combines a Technora sheath, Dyneema inner jacket, and nylon core for a high-strength, abrasion-resistant, rope.
- 30″ BeeLine Eye to Eye Hitch Cord: Made with Technora-black, these eye tails feature a para-aramid fiber with high tensile strength, high modulus and excellent resistance to heat and chemicals.
- Octavia Triple Attachment Pulley: smooth ball bearings, three connection points, wide side plates to better tend a hitch cord, and highly visible.
- 2 x Raider+ Carabiners: The oval shape allows for proper orientation and helps to limit load shifting. The combination of the key lock nose and smooth 3 stage gate action make this connector a must have for any serious work at height professional.
-
8mm Ocean Polyster hitch cord with an aluminum CT snap. Used to adjust the length of your positioning lanyard. -
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 31-1/2" at rest and 44" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway.
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 33-1/2" at rest and 48" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway
- Orange.
Find It Fast
Find It Fast
Our Location & Working Hours
© 2024, Endor’s Arborist & Rope Supply LLC.
