- (MBS) Minimum Breaking Strength (kN) 50
- (MBS) Minimum Breaking Strength (lbf) 11240
- Gate opening gap (mm) 23
- Nose type Yes
- ANSI compliant version As standard
- Serial numbering As standard
- Finish Zinc plated
- Weight (grams) 276
- Weight (ounces) 10
-
-
- (MBS) Minimum Breaking Strength (kN) 50
- (MBS) Minimum Breaking Strength (lbf) 11240
- Gate opening gap (mm) 20
- Gate opening gap (inches) 3/4
- Finish Zinc plated
- Weight (grams) 220
- Weight (ounces) 8
-
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system, or for keeping valuable tools safe on a lanyard. Sized between a ‘keyring’ and a full-size karabiner, and featuring gate openings of 15mm (0.59”) and 13mm (0.51”) for the straight and screwgate respectively, the KL100 is capable of a huge range of non-PPE applications and countless other uses! 3 pack contains the following colours: Turquoise, Lemon, Green Technical Information (MBS) Minimum Breaking Strength (kN)9 (MBS) Minimum Breaking Strength (lbf)2023 Nose typeKeylock nose Serial numberingn/a Gate/lock typeScrewgate FinishAnodised Weight (grams)23 (per Karabiner) Weight (ounces)0.8 (per Karabiner) Height (mm)73 Height (inches)2.9 Approved Standards NOT for PPE -
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system, or for keeping valuable tools safe on a lanyard. Sized between a ‘keyring’ and a full-size karabiner, and featuring gate openings of 15mm (0.59”) and 13mm (0.51”) for the straight and screwgate respectively, the KL100 is capable of a huge range of non-PPE applications and countless other uses! 3 pack contains the follwoing colours: Turquoise, Lemon, Green Technical Information (MBS) Minimum Breaking Strength (kN)9 (MBS) Minimum Breaking Strength (lbf)2023 Gate opening gap (mm)15 Gate opening gap (inches)0.59 Nose typeKeylock nose Serial numberingn/a Gate/lock typeStraight gate FinishAnodised Weight (grams)20 (per Karabiner) Weight (ounces)0.7 (per Karabiner) Height (mm)73 Height (inches)2.9 Approved Standards NOT for PPE -
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system, or for keeping valuable tools safe on a lanyard. Sized between a ‘keyring’ and a full-size karabiner, and featuring gate openings of 15mm (0.59”) and 13mm (0.51”) for the straight and screwgate respectively, the KL100 is capable of a huge range of non-PPE applications and countless other uses! Technical Information (MBS) Minimum Breaking Strength (kN)9 (MBS) Minimum Breaking Strength (lbf)2023 Gate opening gap (mm)13 Gate opening gap (inches)0.51 Nose typeKeylock nose Serial numberingn/a FinishAnodised Weight (grams)23 Weight (ounces)0.8 Height (mm)73 Height (inches)2.9 Approved Standards NOT for PPE -
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system, or for keeping valuable tools safe on a lanyard. Sized between a ‘keyring’ and a full-size karabiner, and featuring gate openings of 15mm (0.59”) and 13mm (0.51”) for the straight and screwgate respectively, the KL100 is capable of a huge range of non-PPE applications and countless other uses! Technical Information (MBS) Minimum Breaking Strength (kN)9 (MBS) Minimum Breaking Strength (lbf)2023 Gate opening gap (inches)15 Eye diameter (mm)0.59 Nose typeKeylock nose Serial numberingn/a Gate/lock typeStraight gate FinishAnodised Weight (grams)20 Weight (ounces)0.7 Height (mm)73 Height (inches)2.9 Approved Standards NOT for PPE -
- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Gate opening gap (mm) 30
- Gate opening gap (inches) 1 1/4
- Gate/lock type Bent gate
- Finish Anodised
- Colour Grey
- Weight (grams) 88
- Weight (ounces) 3 1/9
-
Small Aluminum Ring
Internal Diameter = 27mm (1 1/8") Outside Diameter = 51mm (2")Large Aluminum Ring
Internal Diameter = 45mm (1 3/4")Outside Diameter = 70mm (2 3/4") -
The NEW ISC APEX is fitted with an adjustable cam, allowing the user to select from multiple clearly identifiable friction settings, in accordance with rope type and diameter. The spring-loaded cam can be adjusted in under 5 seconds- simply depress the spring-loaded button, swing the side plate open and then pull the spring-loaded cam outwards a short way. Rotate the cam to select the new setting, release the cam and close the device! No tools needed and no drop-able parts!
The NEW ISC APEX is fitted with a swing-open side frame which allows for quick and easy mid-line attachment, even when wearing gloves! The push-button, swing-open side frame has a double-lock closure system for added security and an audible ‘click’ to confirm closure.
Rope diameter range (mm)11-13 (7/16 - 1/2") with four friction settings (WLL) Working Load Limit (kg)120 (WLL) Working Load Limit (lbs)264 Serial numbering As standard Body finish Anodised Weight (grams)177 Weight (ounces)6.2
Kit Contents: [1] APEX [1] Squirrel FLEX Tether
[1] PHLOTICH Pulley (Bearing) [1] Aluminium HMS Karabiner (Supersafe Triple-lock Gate) [1] Teufelberger OP 85cm e2e Hitch (10mm) -
- (MBS) Minimum Breaking Strength (kN) 30
- (MBS) Minimum Breaking Strength (lbf) 6744
- Gate opening gap (mm) 20
- Gate opening gap (inches) 3/4
- Finish Anodised
- Colour Grey
- Weight (grams) 87
- Weight (ounces) 3
-
The D4TM is a double-stop device with an auto-lock function (which is activated whenever the operator lets go of the handle) and a panic brake which is not overly sensitive in normal use. The D4 cam is made from a super hard solid Stainless Steel and is highly wear and corrosion resistant. The D4 is compliant with CE Standards, NFPA T and ANSI Z359.4 for the worldwide Rope Access and Rescue markets which typically use 10.5mm/11mm ropes. The D4 Descender features a unique and innovative progressive cam action, which offers control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. It is also easy to back-feed the rope through the D4 and therefore it can be used for smooth ascending or for emergency hauling (when used as part of a 2:1 ‘Z-rig’). The D4 has a rated load of 240kg (529lb), making it a true Work/ Rescue Descenders. It is not necessary to build in additional friction to achieve these loads, although it can be useful to do so, for an even higher degree of control in Belay applications. The minimum user weight is 60kg (132lb).Compatible with rope diameter (mm)10.5-11.5mm (7/16") Panic brakeYes Number of persons2 (WLL) Working Load Limit (kg)240 (WLL) Working Load Limit (lbs)529 ANSI compliant versionAs standard Serial numberingAs standard EZYiDAvailable on request Cam materialStainless Steel FinishAnodised
Approved Standards
EN12841, - meets the requirements of ANSI Z359, NFPA 1983 & EN341 5kN Slip load Max User Weight: 240kg (530lbs) -
The RP037 Micro Pulley has a 12kN Rated Bridge- Compatible with rope diameter (mm) max 13mm (1/2")
- (MBS) Minimum Breaking Strength (kN) 28
- (MBS) Minimum Breaking Strength (lbf) 6295
- Wheel material Aluminium
- Finish Anodised
- Colour Red
- Weight (grams) 90
- Weight (ounces) 3
-
- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Gate opening gap (mm) 15
- Gate opening gap (inches) 5/8
- Finish Anodised
- Colour Grey
- Weight (grams) 46
- Weight (ounces) 2
-
- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Gate opening gap (mm) 22
- Gate/lock type Bent gate
- Finish Anodised
- Colour Grey
- Weight (grams) 47
-
- (MBS) Minimum Breaking Strength (kN) 27
- (MBS) Minimum Breaking Strength (lbf) 6070
- Gate opening gap (mm) 22
- Gate opening gap (inches) 7/8
- Finish Anodised
- Colour Grey
- Weight (grams) 93
- Weight (ounces) 3
-
- (MBS) Minimum Breaking Strength (kN) 27
- (MBS) Minimum Breaking Strength (lbf) 6070
- Gate opening gap (mm) 22
- Gate opening gap (inches) 7/8
- Finish Anodised
- Colour Grey
- Weight (grams) 93
- Weight (ounces) 3
-
- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Gate opening gap (mm) 20
- Gate opening gap (inches) 3/4
- Finish Anodised
- Colour Grey
- Weight (grams) 85
- Weight (ounces) 3
-
HALO Rigging Plates form part of a compatible system and were developed to match the ratings on our Karabiners and Prussik pulleys, at 40kN/ (8992lbf), 50kN (11,240lbf) and 70kN (15,736lbf). Each plate is manufactured from aerospace grade Aluminium and feature uniquely shaped apertures which allow for loading with multiple Karabiners simultaneously. CNC machined radiused edges make the apertures rope and webbing friendly. COLOR: BLUE -
The Phlotich Pulley is a multi-aperture device specifically designed for SRT and DdRT. The new Phlotich Pulley is available fitted with bushings or bearings. -
The RP290 Rigging Rope Wrench is a lowering device suitable for loads up to 70kg (154lbs). The RP290 uses a bearing to apply friction to the lowering line whilst anchored at the top of a tree. This makes it controllable from both ground level or at height which is useful for smaller crews and on job multi-tasking. Rope diameter range (mm) 13 Compatible with rope diameter (mm) 13 Working Load Limit (kg) 70 Working Load Limit (lbs)154 (MBS) Minimum Breaking Strength (kN)30 (MBS) Minimum Breaking Strength (lbf)6744 Bearing type Bush The RP292 Rigging Rope Wrench is a lowering device suitable for loads ranging from 20 to 120kg (44-264lbs). The RP292 is fitted with a one-way locking wheel, which provides additional friction when lowering, allowing increased control of heavier loads. During lifting, the wheel runs freely. Rope diameter range (mm) 13 Compatible with rope diameter (mm) 13 Working Load Limit (kg) 20 -120 Working Load Limit (lbs)40 - 264 (MBS) Minimum Breaking Strength (kN)30 (MBS) Minimum Breaking Strength (lbf)6744 Bearing type: BEARING -
- Rope diameter range (mm) 11 - 13mm (7/16 - 1/2")
- Pulley wheel colour Grey
- Wheel material Aluminium
- Finish Anodised
- Colour Red
- Weight (grams)128
- Weight (ounces)5
-
The NEW ISC Squirrel FLEX Tether is designed to offer the optimal balance of rigidity and flexibility for SRT Climbing with the Rope Wrench.
The Squirrel FLEX is made from a high-quality kernmantle rope, over-moulded with an advanced Polymer, selected to create a rigid tether that allows just the right amount of flex and an ultra-premium finish.
Minimising unwanted slack in a climbing system is always a high priority, so we designed the sewn eyes to offer a snug fit, firmly holding the karabiner and providing an optimal connection to your rope wrench. The Squirrel FLEX Tether is constructed with contrasting stitching, allowing visibility for easy inspections.
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system.
-
SG Screwgate These Karabiners are supplied with a captive pin (pin supplied loose) The KL308 D Shape Karabiner has a KEYLOCK nose as standard.Technical Information
(MBS) Minimum Breaking Strength (kN)35 (MBS) Minimum Breaking Strength (lbf)7868 Gate opening gap (mm)17 Gate opening gap (inches)5/8 FinishZinc plated Weight (grams)175 Weight (ounces)6
-
Large Ring:
Internal Diameter = 45mm (1 3/4") Outside Diameter = 70mm (2 3/4")- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Proof loaded (kN) 16
- Proof loaded (lbf) 3597
- Finish Anodised
- Colour Silver
- Weight (grams) 54
Small Ring:
Internal Diameter = 27mm (1 1/8") Outside Diameter = 51mm (2")- (MBS) Minimum Breaking Strength (kN) 25
- (MBS) Minimum Breaking Strength (lbf) 5620
- Proof loaded (kN) 16
- Proof loaded (lbf) 3597
- Finish Anodised
- Colour Silver
-
The ISC STRYDERTM Foot Ascender has been designed following extensive feedback from industry users. During the development of STRYDERTM, durability and functionality were at the top of the priority list. -
The SH909 Triple-action Snaphook is fitted with an opening mechanism which requires the gate, second-action keeper and third-action keeper to be engaged sequentially, in order to open the device. This opening sequence helps to reduce the risk of unintentional opening of the gate. The SH909 has a ‘keylock’ anti-snag nose. The SH909 has a larger than standard 26mm (1”) gate opening clearance. The SH909 has a lightly textured, low-shine anodised finish. Technical Information (MBS) Minimum Breaking Strength (kN)28 (MBS) Minimum Breaking Strength (lbf)6294 Gate opening gap (mm)26 Gate opening gap (inches)1 Eye diameter (mm)20 Eye diameter (inches)0.78 Nose type Keylock nose Serial numbering As standard Finish Anodised Weight (grams)155 Weight (ounces)5.5 -
Product information: ISC Hand Ascenders are sleek & ergonomic by design. They are machined from high-strength Aluminium extrusion and are suitable for heavy-duty use. All ISC Hand Ascenders have both primary and secondary attachment holes, are fitted with stainless steel cams and come with moulded, comfort-grip handles. The Ultrasafe Hand Ascender is fitted with a Pin for increased safety and control.- Rope diameter range (mm) 9 - 13
- Serial numbering As standard
- Cam material Stainless Steel
- Finish Anodised
-
Prevention and relief from exposure to poisonous plants- Use post-contact cleanser towelettes after contact with plants to remove irritating oils from skin
- Moisturizers and botanicals soothe damaged skin
- Helps clean contaminated tools and equipment
-
Prevention and relief from exposure to poisonous plants- Apply pre-contact towelettes before potential exposure to poison oak, ivy, or sumac to prevent rashes
- One application provides hours of protection
- Dries immediately
- Use post-contact cleanser towelettes after contact with plants to remove irritating oils from skin
- Moisturizers and botanicals soothe damaged skin
- Helps clean contaminated tools and equipment
-
The Jail Brake is the newest technology on the market to lower heavy limbs or objects down with the most precise control. Quicker and easier to use than anything else out there. It will not twist, hockle or burn up your ropes. Rope is loaded all on one side of the device, so safety checks are easy to do from far away and for beginners. Rated for up to 3/4 inch rope and up to 2500lbs working load. Takes seconds to load, change friction output and unload. Additional anchoring point allows for several different uses with less equipment. Patent PendingBy eliminating the wrapping of the rope around a cylinder, the Jail Brake doesn't produce hockles/rope twists/kinks. This saves your groundsman time and you money Aluminum construction with engineered venting, means the device is one of the most efficient at drawing heat away from your rope. Load isn't concentrated on one part of the device which means your rope isn't generating nearly as much heat or wear on your equipment No hidden cleats or confusing rope path. Simply make sure the rope is through the top pigtail, around the bottom rung and out through the bottom pigtail. Easy to see even from up in a tree -
The folding pole saw combines safety and convenience with its foldable design, lightweight construction, and easy tool installation. Its high-visibility yellow finish prevents tool loss and serves as a handsaw. Paired with the Barracuda™ Tri-Cut Saw Blade, the 13-inch hard-chrome plated blade ensures cleaner, quicker cuts and extended durability. This dynamic duo enhances efficiency and safety for arborists and homeowners alike.
Enhanced Safety: Safeguard against accidents with a blade cover that shields the cutting edge when not in use. Gear Protection: Protect ropes, harnesses, and equipment from costly damage during climbing and storage. Lightweight Advantage: Experience superior mobility with a lightweight design, outperforming traditional pole saws with leather scabbards. Compatible Ferrules: Works seamlessly with Jameson standard aluminum ferrules for reliable performance. NOTE: Fiberglass poles not included -
The Wire and Limb Raiser is a versatile multipurpose tool to help you avoid aerial obstacles. This tool attaches to any of our fiberglass poles to help you place cable on rollers during line construction or move tree branches out of the way of aerial lines. Plated steel wire raiser is designed for placing cable on rollers, construction blocks and hardware during line construction. Conveniently pulls or lifts branches out of dense foilage. No adapter needed. Not for use on or near live wires. -
Blade Length13 inBlade MaterialSteelFeaturesTri-Cut BladeFor Use WithMfr. No. PS-3FP; SB-UCMaterial ApplicationWoodTeeth per Inch21Tooth GrindTri-Cut Impulse HardenedBlade Thickness0.25 inCompatible with Grainger Part Number5KRF0Compatible with Manufacturer Model Number20; PS-3FP; SB-UCCompatible with SeriesJameson PS/Jameson SB/Smith #20Cutting Edge TypeSerratedFinishChromeSingle or Double EdgedSingle EdgeUNSPSC27112802Country of OriginTaiwan (subject to change)- Product Description
-
The curved, serrated teeth on pruning saw blades aggressively cut through tree branches, small logs, and thick brush. They mount to the handle of a compatible pruning saw. The blade curve conforms to the arc of the branches to increase surface contact
-
- Heavy Duty Lifting Tongs.
- Heavy duty construction.
- Anti slip handle.
- Heavy duty rivets
-
Telescopic saw with hook to reach up to 15ft Dimensions: 4 × 12 × 90 in -
EZ KUT Kamikaze 20′ Extending Pole Saw Dimensions: 4 × 12 × 90 in
