- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 33-1/2" at rest and 48" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt -
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 31-1/2" at rest and 44" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway.
- Orange.
-
Out of stock
A popular choice steel tree climber that has a contoured shank, offset stirrup and a dowel & screw replaceable gaff. Features 2239 nylon leg straps, 21391 nylon foot straps, and 3122 climber pads. Includes standard length sleeves, model 9204, adjusting from 16 1/4″ to 18 3/4″. Long sleeves adjusting from 19 1/4″ to 21 3/4″ also available use model 9202. Includes:- 2239 Nylon Leg Straps
- 21391 Nylon Foot Straps
- 3122 Climber Pads
- Material: Steel
- Gaff Type: Tree
- Gaff Material: Steel
- Gaff Attachment Type: Screw & Dowel
- Gaff Angle: 23 Degrees
- Foot Straps: Yes / Model No: 21391
- Leg Straps: Yes / Model No: 2239
- Climber Pads: Yes / Model No: 3122
- GRiP: No
- Shank Type: Contoured
- Stirrup Type: Offset
- Stirrup Width: Standard
- Sleeve Length: Standard
- User Weight Capacity: 350 lbs
- Weight: 2 lbs
- Standards: ASTM F887
- Made in USA?: Yes
-
Out of stock
The Big Shot is designed to launch a throw weight high into the canopy to set climbing lines, rigging lines, and friction savers. Shots over 100' can be achieved with amazing accuracy. The Big Shot head is designed to be used with fiberglass poles . Not for use with wooden poles. Pouch/Sling Only -
Big Shot head and sling only. -
The 8mm eye and eye Bee-Line cord is high performance, and lasts a long time. This cord has a technora/poly cover, and is heat resistant. Our 8mm beeline eye and eye comes with two sewn eyes or two spliced eyes. MBS: 8,000 LBS -
The 10mm eye and eye Bee-Line cord is high performance, and lasts a long time. This cord has a technora/poly cover, and is heat resistant. Our 10mm beeline eye and eye comes with two sewn eyes or two spliced eyes. MBS: 11,000 LBS -
ARS 12" saw blade with wood chip relief gullets (replacement blade for HS-10.) -
Out of stock
The 8mm Armor-Prus hitch cord is made with a cover that is a unique blend of Technora and polyester. The result is an armored cover over a core of light weight Spectra 900/Kevlar. It has two sewn eyes. -
The 10mm Armor-Prus hitch cord is made with a cover that is a unique blend of Technora and polyester. The result is an armored cover over a core of light weight Spectra 900/Kevlar. It has two sewn eyes. -
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
