- Dimensions: 75 x 100mm
- Weight: 81g
- MBS (Major Axis): 27kN
- MBS (Minor Axis): 9kN
- MBS (Gate Open): 7kN
- Certification: EN 362:2004 B, EN 12275:2013 B & H
-
The Rhino HMS carabiner tackles cross loading head on! The horn feature on the leading edge of the spine significantly reduces the possibility of cross loading with rigging, devices and pulleys by restricting the rotation of devices, whilst the clean nose design provides snag-free gate entry. The smooth and robust top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces. -
A connector with an integrated pulley sheave. It features a high efficiency roller bearing sheave(s), threaded removable captive bar and a full strength textile friendly becket. The uniquely profiled spine and captive bar aid in maintaining correct orientation. The design of the Revolver Rig is such that when using a connector attached to the becket any friction between the connector and rope is minimized.- Large sheave tread diameter for large bend radius
- High efficiency roller bearings
- Full strength becket accepts most connectors or direct textile connection
- Removable captive bar
- DMM iD optional
- Key lock nose for snag free operation
- Uniquely profiled spine to aid correct orientation
- Major Axis MBS 25kN
- Minor Axis MBS 7kN
- Gate MBS 7kN
- up to 13mm rope
-
The Revolver with a Locksafe gate forms a neat ‘semi-captive’ interface with many of our treecare components such as our Rigging Hubs and Anchor Rings. This limits the risk of the connector from flipping over or cross loading, making them indispensable in remote or fixed rescue systems. Features- Conforms to EN362:2004/B
- Unique and legendary connector incorporates low friction roller system
- I-Beam section for increased strength to weight ratio
- Keylock clean nose for snag free connection
- Hot forged and fully heat treated aluminium for lightness and maximum strength
- Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
- Recommended for special applications including rescue and hoisting
-
Conical leading edge guides cone through anchor components reliably and with little resistance, then locates in retrieval element. Max diameter tailored to a selection of common tree care anchor components/assemblies. High performance polymer – impact resistance, UV tolerance, high dimensional accuracy combine to ensure reliable performance over extended lifespan Color coded – Cone S = Yellow/OD 20.5mm, Cone L = Red/OD22.3mm -
- 110 Spacer is Compatible with DMM Pinto Pulley
- 120 Rig Spacer is Compatible with DMM Pinto Rig Pulley
-
Features- Hot forged aluminium side plates provide strength and durability
- Heat treated stainless steel spindles for high strength and corrosion resistance
- Textile friendly surfaces
- Riveted and tamperproof assembly
- Pre lubricated sintered bronze bearings for ultra smooth operation
- Recommended for aborist, rescue, hauling and many applications where friction reduction is required
- Load bearing beckett
- Conforms to the following standards: EN 12278:2007 and NFPA 1983(06 ED ) Type G
-
The PerfectO is a compact true oval connector that minimizes the eye-to-eye length whilst maintaining usability and easy one-handed use. Their shape provides effective centering of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction.- 24kN
- EN12275:2013 X/B, EN362:2004 B (Certifications)
-
The DMM Kinisi Max is a modular and hard-wearing sit harness developed in partnership with Treemagineers. Every aspect of the Kinisi is adjustable, including both rope bridges through the use of a patented bridge adjuster. Your weight is spread comfortably over the ergonomic webbing pattern by tough support material and foam padding. All hardware and the Kinisi itself are made to DMM's high standards at their facilities in Wales. Compatible with a variety of tool carriers and accessories, including the DMM Tendon.Details
Features- The patented rope bridge adjuster provides easy configuration for comfort and optimized positioning.
- The rear restraint point on the back of the harness is easy to locate and doubles as a secure attachment point for a chainsaw lanyard.
- The two side rings provide work positioning attachment points.
- Two forward Ds provide suspension attachment points and can be positioned to suit your center of gravity for comfort and maneuverability.
- Sliding aluminum buckles allow for smooth and hard-wearing adjustment.
- Moveable webbing stoppers let you run personalized webbing lengths without compromising safety.
KINIM-S- Size: Small
- Color: Black
- Weight: 2400g
- Hip Dims. (in): 25 - 33
- Leg Dims. (in): 17 - 23
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008
KINIM-M- Size: Medium
- Color: Black
- Weight: 2800g
- Hip Dims. (in): 31 - 40
- Leg Dims. (in): 18 - 25
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008
KINIM-L- Size: Large
- Color: Black
- Weight: 3000g
- Hip Dims. (in): 35 - 48
- Leg Dims. (in): 20 - 29
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008
-
The Director Swivel Eye is a compact termination connector designed to load in the strongest orientation. Ideal for lanyards, these lightweight, versatile and strong carabiners are easy to handle and can reduce the overall length of a system. Featuring a textile friendly, swivelling eye, our new extra short gate, a generous curve in the loading area and boasting healthy gate openings, the Director Swivel Eye can be stitched, spliced or knotted into a system or lanyard or even connected to a DMM oval with a Prestin configuration aid to create a compact, swivelling double connector. -
he Director Swivel Boss is a compact, swivelling termination connector designed to load in the strongest orientation. Ideal for lanyards, these lightweight, versatile and strong carabiners are easy to handle and can reduce the overall length of a system. The Director Swivel Boss features a textile friendly, configurable eye, an extra short gate, a generous curve in the loading area and healthy gate openings. They can be retro fitted onto pre-stitched or swaged lanyard components or used in conjunction with DMM Linkits to form super short connectable systems. When used in conjunction with the DMM Director Yoke, it forms the ultimate swivelling, pivoting double connector. Choose between a D shape or Bow shape shackle depending on attachment requirements. -
Developed alongside the compact swivel range, our new compact shackles are light, strong and tamper resistant. The double allen key locking axle locks in components forming a smooth multi directional semi-fixed link.
