- Nitrile micro-foam palm coating
- Dotted palm
- 15 gauge nylon + spandex liner (silicone free)
- Reinforced thumb
- Touch sensitivity
- Good grip in all conditions
-
ANSI/ISEA 105-2016 – PUNCTURE 2 | ABRASION 6EN388: 2016 – 4131X -
- Gray Cap Mounted Muff•
- NRR 22dB•
- Dielectric•
- Soft foam ear cups.•
- Flip up when not in use.•
- Flip down over ears to use.•
- Fits wide variety of hard hats.•
- Easily accessible while working.•
- Exceeds ANSI S3.19 Requirements
-
- ABS/PC blend offers superior strength and higher heat resistance.
- 6-point ratchet suspension with option to easily interchange to a 4-point.
- 4-point chin strap with breakaway feature.
- Soft PU strap comfortably rests under the chin and secures the hat.
- 3 adjustable height options for the suspension.
- 2 settings to adjust the wearing angle
- Adjustable knob allows easy adjustment of suspension from size 6 1/2 to 8
- MARKINGS Types:
- Type 1 offers protection to the top of the head
- Class E (electrical) rated for 20,000 volts
- Provides protection at low temperatures -22ºFHT: Provides protection at high temperatures 140ºF
- Date code: Indicates month and year when the shell was molded — does not indicate service life
- Maximum service life of 5 years (shell) & 1 year (suspension) from the time of first use
- Never alter or modify the shell or suspension system
- Inspect the hard hat each time before use and replace if there is any sign of damage
- Replace hard hat after it receives a considerable impact
- Accessories such as liners have not been tested to the requirement of this standard
- Clean only with mild soap and lukewarm water
- Store hard hat in a clean, dry place that is out of direct sunlight
- Do not use paints, chemicals, adhesives, gasoline or similar substances on the hard hat
- Labels are acceptable if they do not affect a hard hat’s protective rating or make it difficult to find damage
-
Zippered closure• Fits a variety of glasses• Black hard spectacle case GENERAL SPECIFICATION Material: EVA case covered by polyester Case size: 165mm x 85mm x 50mm -
Black wire mesh glasses provides excellent eye protection for work environments with high humidity that require impact protection // Meets ANSI Z87.1 requirements for screen lenses Z87: ANSI standard for eye and face protection devices -
Lightweight polycarbonate frameless protection safety Glasses Integrated nosepiece P: Manufacturer’s mark Z87: ANSI standard for eye and face protection devices +: High impact S: Special Purpose X: Tested Anti-fog UV Filter Transmittance U6: .01% max effective far UV • .1% max near UV Visible Light Filters L1.7: 55% Max. Visible Light L3: 18% max visible light -
Removable flame resistant foam padding // Lightweight spectacle – 26.3gm // Slim co-injected temples // Custom imprinting available Frames come in All black as well as Black and Lime. Lenses come in: Clear, Dark Gray and I/O (Indoor/Outdoor) A slight tint P: Manufacturer’s mark Z87: ANSI standard for eye and face protection devices +: High impact S: Special Purpose X: Tested Anti-fog UV Filter Transmittance U6: .01% max effective far UV • .1% max near UVVisible Light Filters L1.7: 55% Max Visible Light -
The Director Swivel Eye is a compact termination connector designed to load in the strongest orientation. Ideal for lanyards, these lightweight, versatile and strong carabiners are easy to handle and can reduce the overall length of a system. Featuring a textile friendly, swivelling eye, our new extra short gate, a generous curve in the loading area and boasting healthy gate openings, the Director Swivel Eye can be stitched, spliced or knotted into a system or lanyard or even connected to a DMM oval with a Prestin configuration aid to create a compact, swivelling double connector. -
he Director Swivel Boss is a compact, swivelling termination connector designed to load in the strongest orientation. Ideal for lanyards, these lightweight, versatile and strong carabiners are easy to handle and can reduce the overall length of a system. The Director Swivel Boss features a textile friendly, configurable eye, an extra short gate, a generous curve in the loading area and healthy gate openings. They can be retro fitted onto pre-stitched or swaged lanyard components or used in conjunction with DMM Linkits to form super short connectable systems. When used in conjunction with the DMM Director Yoke, it forms the ultimate swivelling, pivoting double connector. Choose between a D shape or Bow shape shackle depending on attachment requirements. -
Chest harness for seat harness
The TOP chest harness transforms the AVAO SIT, AVAO SIT FAST, FALCON, FALCON MOUNTAIN and SEQUOIA SRT seat harnesses into fall arrest harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. When the waistbelt is loaded, they help distribute the load over the shoulders. They also have a system for stowing the fall-arrest lanyard connectors and keeping them within reach.
-
SawHaul Base Kit with Scabbard is designed for DIY Installations to any flat surface. It includes the SawHaul bracket, Pro Grade Scabbard, and minimal hardware. Designed to be easily adaptable to your installation needs. Custom-built Pro Grade Scabbard remastered design specifically fits into the SawHaul. Scabbard Specs: 3/4" inside gap, and 5" wide. Top cap features a new 1/4" thickness and tool holder for scrench and file. MAKE SURE THE CHAIN HAS COME TO A COMPLETE STOP BEFORE PLACING YOUR SAW INTO YOUR SAWHAUL. FAILURE TO DO SO WILL VOID ALL WARRANTY. -
Coiled design stretches to more than double its resting length to give you more mobility when using your saw, and retracts to hang close to your saddle or belt- Constructed of heavy-duty coiled bungee cord covered with tubular nylon webbing.
- Nylon webbing is box-stitched for strength and ends are heat-sealed to prevent fraying.
- Measures 25" at rest and 6' long when fully extended.
- A half twist in the loop end helps keep equipment hanging straight.
- Not intended for breakaway use.
