Technical Information
(MBS) Minimum Breaking Strength (kN)70 (MBS) Minimum Breaking Strength (lbf)15736 Gate opening gap (mm)33 Gate opening gap (inches)1 1/4 FinishZinc plated Weight (grams)540 Weight (ounces)19
-
SG Screwgate These Karabiners are supplied with a captive pin (pin supplied loose) The KL308 D Shape Karabiner has a KEYLOCK nose as standard.Technical Information
(MBS) Minimum Breaking Strength (kN)35 (MBS) Minimum Breaking Strength (lbf)7868 Gate opening gap (mm)17 Gate opening gap (inches)5/8 FinishZinc plated Weight (grams)175 Weight (ounces)6
-
- MBS: major-14,600/minor-2,600
- Size: 4.25 x 2 3/8 / 13/16
- Weight: 6.9oz
-
- (MBS) Minimum Breaking Strength (kN) 50
- (MBS) Minimum Breaking Strength (lbf) 11240
- Gate opening gap (mm) 20
- Gate opening gap (inches) 3/4
- Finish Zinc plated
- Weight (grams) 220
- Weight (ounces) 8
-
- (MBS) Minimum Breaking Strength (kN) 50
- (MBS) Minimum Breaking Strength (lbf) 11240
- Gate opening gap (mm) 23
- Nose type Yes
- ANSI compliant version As standard
- Serial numbering As standard
- Finish Zinc plated
- Weight (grams) 276
- Weight (ounces) 10
-
- (MBS) Minimum Breaking Strength (kN)50
- (MBS) Minimum Breaking Strength (lbf)11240
- Gate opening gap (mm)27
- Gate opening gap (inches)1 1/8
- FinishZinc platedWeight (grams)335
- Weight (ounces)12
-
The KL321 combines the specification of an Oval with that of a 'D' shape Carabiner. True Ovals are not capable of achieving high breaking loads, as their symmetrical shape shares the load between the spine and the gate of the Carabiner. The weakest part of any Carabiner is the gate and so wherever possible, designers will try to bias the load toward the spine of the Carabiner. This is why 'D' shape Carabiners (typically) give the highest breaking loads. (MBS) Minimum Breaking Strength (kN) 40 (MBS) Minimum Breaking Strength (lbf) 8800 Gate opening gap (mm) 17 Gate opening gap (inches) 5/8 Weight (grams) 193 Weight (ounces) 6.8 -
Galvanized-steel oval connector with triplex twist-lock gate, ideal in harsh environments and particularly recommended to set up anchors or for use with large-section devices (e.g. pulleys, ascenders and mobile fall arresters, etc.). Main characteristics: symmetrical shape and optimal radius for rope insertion; high strength, which allows the connector to be used as a carabiner for progression; equipped with catch-free closure for effortless clipping.
