Compatible with rope diameter (mm)10.5-11.5mm (7/16") Panic brakeYes Number of persons2 (WLL) Working Load Limit (kg)240 (WLL) Working Load Limit (lbs)529 ANSI compliant versionAs standard Serial numberingAs standard EZYiDAvailable on request Cam materialStainless Steel FinishAnodised
-
The D4TM is a double-stop device with an auto-lock function (which is activated whenever the operator lets go of the handle) and a panic brake which is not overly sensitive in normal use. The D4 cam is made from a super hard solid Stainless Steel and is highly wear and corrosion resistant. The D4 is compliant with CE Standards, NFPA T and ANSI Z359.4 for the worldwide Rope Access and Rescue markets which typically use 10.5mm/11mm ropes. The D4 Descender features a unique and innovative progressive cam action, which offers control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. It is also easy to back-feed the rope through the D4 and therefore it can be used for smooth ascending or for emergency hauling (when used as part of a 2:1 ‘Z-rig’). The D4 has a rated load of 240kg (529lb), making it a true Work/ Rescue Descenders. It is not necessary to build in additional friction to achieve these loads, although it can be useful to do so, for an even higher degree of control in Belay applications. The minimum user weight is 60kg (132lb). -
The NEW ISC Squirrel FLEX Tether is designed to offer the optimal balance of rigidity and flexibility for SRT Climbing with the Rope Wrench.
The Squirrel FLEX is made from a high-quality kernmantle rope, over-moulded with an advanced Polymer, selected to create a rigid tether that allows just the right amount of flex and an ultra-premium finish.
Minimising unwanted slack in a climbing system is always a high priority, so we designed the sewn eyes to offer a snug fit, firmly holding the karabiner and providing an optimal connection to your rope wrench. The Squirrel FLEX Tether is constructed with contrasting stitching, allowing visibility for easy inspections.
Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory karabiner to provide a direct connection between your chest harness and your SRT system.
-
The Jail Brake is the newest technology on the market to lower heavy limbs or objects down with the most precise control. Quicker and easier to use than anything else out there. It will not twist, hockle or burn up your ropes. Rope is loaded all on one side of the device, so safety checks are easy to do from far away and for beginners. Rated for up to 3/4 inch rope and up to 2500lbs working load. Takes seconds to load, change friction output and unload. Additional anchoring point allows for several different uses with less equipment. Patent PendingBy eliminating the wrapping of the rope around a cylinder, the Jail Brake doesn't produce hockles/rope twists/kinks. This saves your groundsman time and you money Aluminum construction with engineered venting, means the device is one of the most efficient at drawing heat away from your rope. Load isn't concentrated on one part of the device which means your rope isn't generating nearly as much heat or wear on your equipment No hidden cleats or confusing rope path. Simply make sure the rope is through the top pigtail, around the bottom rung and out through the bottom pigtail. Easy to see even from up in a tree -
The folding pole saw combines safety and convenience with its foldable design, lightweight construction, and easy tool installation. Its high-visibility yellow finish prevents tool loss and serves as a handsaw. Paired with the Barracuda™ Tri-Cut Saw Blade, the 13-inch hard-chrome plated blade ensures cleaner, quicker cuts and extended durability. This dynamic duo enhances efficiency and safety for arborists and homeowners alike.
Enhanced Safety: Safeguard against accidents with a blade cover that shields the cutting edge when not in use. Gear Protection: Protect ropes, harnesses, and equipment from costly damage during climbing and storage. Lightweight Advantage: Experience superior mobility with a lightweight design, outperforming traditional pole saws with leather scabbards. Compatible Ferrules: Works seamlessly with Jameson standard aluminum ferrules for reliable performance. NOTE: Fiberglass poles not included -
The Wire and Limb Raiser is a versatile multipurpose tool to help you avoid aerial obstacles. This tool attaches to any of our fiberglass poles to help you place cable on rollers during line construction or move tree branches out of the way of aerial lines. Plated steel wire raiser is designed for placing cable on rollers, construction blocks and hardware during line construction. Conveniently pulls or lifts branches out of dense foilage. No adapter needed. Not for use on or near live wires. -
Telescopic saw with hook to reach up to 15ft Dimensions: 4 × 12 × 90 in -
EZ KUT Kamikaze 20′ Extending Pole Saw Dimensions: 4 × 12 × 90 in -
Compatible with ALL KASK helmets. Inner helmet padding featuring Tek Series® that provides water-resistant Insulation for cold weather environments. Detach existing helmet padding to insert.- WINDPROOF Blocks wind for added comfort in varying weather conditions
- BREATHABLE Material is developed for enhanced breathability
- WIND RESISTANT Provides wind protection without effecting breathability
- COLD RESISTANT Insulated for enhanced comfort in cold environments.
- MOISTURE-WICKING Fabric disperses moisture and sweat for added wearer comfort
- WATER RESISTANT Resists water penetration for added protection and comfort.
- FORM FITTING Designed to integrate with helmet without compromising secure fit
- HYDRO OIL REPELLENT Protects from water and oil infiltration as well as environmental impacts.
-
Out of stock
The Kayo The Kayo boots are a new generation of technical chainsaw boots designed to be the perfect footwear suitable for work in a variety of settings. The key features of this boot are its shape and height. The low-cut style includes a chainsaw protected gator and tongue, tailored perfectly for the professional chainsaw user. The upper body of the boot is handcrafted using premium leathers, laminated with chainsaw protective materials and a waterproof membrane. Our signature BreatheDry system ensures the boots are waterproof and highly breathable making the working day more comfortable. To enhance the durability, the Kayo has a rubber randing wrapped around the lower half of the boot. The unique lacing system and secure inner sock gives the user a snug and comfortable fit for a wide or narrow foot. It will also prevent any detritus from entering the boot. The Vibram rubber lug sole ensures you will be sure-footed in all conditions. Key features:- Low cut, slim design boot
- Class 2 chainsaw protection
- Light weight: 1.1kg per boot
- Vibram sole
- Waterproof
- Loop for the SRT climbing system
Customer Reviews
No reviews yet Write a review -
Km 5 the handles made with aluminium make them perfect for moderate working requirements . Ergonomic design that strive for minimum effort and maximum performance -
The combination of a CHEST CRUISER and a PRO STEP produces the KNEE CRUISER knee ascender for ergonomic rope climbs. This is specially designed for use with single rope techniques, e.g. with the TREEREX BUNGEE CHEST with an elasticated cord for hauling the ascender. The orientation of the connection points on the CHEST CRUISER ensures that the rope can run through without resistance.- Clamp mechanism with safety lock
- For 8.0–13.0 mm diameter kernmantle ropes
- Cam with self-cleaning slots for optimum grip on frozen or muddy ropes
- Simple handling
- Approved rope diameter: 8 - 13 mm
- Certification : EN 12841-B
- Certification : EN 567
- Material : Steel
-
Full body harness for safety at work, light, practical and comfortable- Conform to ANSI/ASSE Z359.11-2014 & CE EN 361 norm
- Equipped with load indicators that show any falls and therefore the need to replace the product.
- Equipped with two attachment points (sternal and dorsal).
- Buckles and dorsal attachment point made of steel.
- Equipped with two large gear loops in laterally retracted position.
- Available in two sizes (M/L and XL) easily distinguishable thanks to the rear triangle of different colors.
- It can be used with Safety Belt # 8W.002 equipped with side attachment points that allows the use also as positioning harness.
- High quality, made in Italy
