- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows: -
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Out of stock
This strong and durable hip pouch, made from tough scuff resistant fabric with lime green PVC coated sides, can be attached to your climbing harness to carry small components or extra climbing gear. The wide, elasticated top gives easy access to contents, while keeping dust and chippings out, and there is a ring of sewn loops around the edge of the pouch where you can hang carabiners, or clip other accessories. The TH108 Hip Pouch is available in two sizes – Small and Large. Small: 25 cm (H) x 20 cm (W) x 7 cm (D) (main compartment of Small pouch will take 3 m lanyard with karabiner and rope grab.) Large: 24cm (H) x 27 cm (W) x 7 cm (D) (main compartment of Large pouch will take 7 m lanyard with karabiner and rope grab.) -
- Plastic liner protects leather pouch from cuts
- Lightweight and quiet design.
- Product Dimensions
- Inside Length: 8-1/2"
- Inside Height: 7-1/4"
- Inside Width: 1"
- Overall Length: 9-1/2"
- Overall Height: 9-1/2"
- Overall Width: 1-1/2"
-
Bucket Evacuation kit for emergency egress for those in the utility and arborist industries and in a bucket or lift. The is comprised of:- Teufelberger KMIII in either 50' or 100' lengths,
- Kong Pirata (Descender designed for rope access and work positioning)
- (1) 60cm Loop Runner (35kN) Aro Bull
- 30kN ANSI Gate Rated HMS Carabiner
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 31-1/2" at rest and 44" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway.
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 33-1/2" at rest and 48" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 30" at rest and 45-1/2" long when fully extended.
- Welded nickel plated rings are 2" in diameter. Non-rust manganese bronze 225 snap is 4-1/4" long.
- Not intended for breakaway.
- Orange
-
Out of stock
The perfect tree climbing sit harness for professionals looking for maximum versatility combined with exceptional comfort. Designed to be used in combination with the Tree Access SRT Chest progression chest part and the Turboknee System ascender for SRT. The sturdy build meets European CE EN, ANSI and ASTM standards. The harness offers many connection possibilities for efficient organization, work and positioning: two mobile attachment bridges made of rope reinforced with tubular webbing; side loops at the ends of the lower bridge and aluminum alloy ring on the upper bridge; double ventral attachment point, one metallic and one textile; two side rings on the belt; numerous gear loops and slots for the Kilo gear carabiner. The comfort is incomparable: adjustable connection of the mobile bridges to the belt allow the worker to adjust the position of suspension; ergonomic padding with variable thickness; low-profile patented STS ANSI buckles on the leg loops. 2 sizes. -
Out of stock
The CARITOOL tool holder allows the user to select and return tools with just one hand. It slips in through the harness straps and stays in place, thanks to its stabilizing clip. The gate has a protective feature that limits accidental snagging. It is available in two sizes.Description
- Design allows one-handed selection and return of tools
- Slips in through the harness straps and stays in place, thanks to its stabilizing clip
- Hole on top for attaching a tether to tools
- Upper part designed for grouping and organizing equipment
- Gate has integrated plastic cover to limit the risk of accidental snagging
- Available in two sizes: S and L
Specifications
- Warning: this tool holder is not PPE
-
Shembiner The new CMI Shembiner is a versatile piece that can be used on your arborist saddle, climbing harness or just stick one on your belt to hang a water bottle. The uses are endless! Shembiner XL The New Shembiner XL is a lightweight aluminum hook that attaches to your harness which is wide enough for your chainsaw handle to fit inside the hook itself. That allows the climber to quickly and easily remove and rack chainsaws and tools without having to fiddle around with a gate. Another cool feature is an extra hole so you can attach a chainsaw lanyard directly to the Shembiner XL, or to carry more gear. -
- These durably constructed, American-made suspenders feature a detachable water bladder and tube for convenient hydration any time
- Comfortable design evenly places the weight of your saddle or belt on your shoulders
- ProCool™ Mesh Technology allows air circulation for a cooling effect
- Water bladder holds up to 1.5L of water
- Chest strap buckle features a built-in emergency whistle
- A small carabiner can be attached to the loop on the chest strap for device tending
- Suspenders can be used with or without the detachable water bladder
- Nickel-plated snaps and sliders allow for convenient attachment and adjustment.
