- The 630-denier black nylon ditty bag features two snaps on the back for attachment to our positioning saddles or the saddle of your choice.
- Elastic top provides easy access to small tools, short throw lines, gloves and other personal items you’d like to keep close at hand.
- Hole at bottom offers easy clean-out and is reinforced with a grommet.
- The 1,000-denier red polyester first aid bag attached to the front features flaps that help protect contents from the elements.
- Measures 9" W x 9" H x 5" D with a 4" W x 5-1/2" H x 1-1/2" D first aid bag.
-
Convenient design features a roomy ditty bag with a compact first aid bag attached to the front -
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Out of stock
The antiSHOCK Tool Lanyard is an innovation for arborists developed by TEUFELBERGER. It is a versatile lanyard for various tree care tools. What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220 – 240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150 - 180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries. Functionality of the tear webbing: The webbing is torn open until the impact force has been absorbed. If the saw does not come unstuck again, for example, the webbing will tear open completely after 70 cm, and the tool will drop to the ground. Due to a special pretreatment of the yarns, the elastic webbing is exceptionally abrasion resistant. PPE certification: Our system for identifying PPE certified products is as follows:- Green identifies a PPE product
- Red means that a product has not been certified for PPE use.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 31-1/2" at rest and 44" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway.
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 33-1/2" at rest and 48" long when fully extended.
- Welded nickel plated rings are 2" in diameter.
- Not intended for breakaway
- Orange.
-
Bungee design easily stretches when you’re using saw and retracts when hanging close to your saddle or belt- These 1-3/16" wide double box-stitched nylon webbing straps with 1" elastic easily adjust by attaching the rings to a snap on a saddle or belt.
- Heat-sealed ends help prevent fraying.
- A half twist in the loop end helps keep equipment hanging straight.
- 30" at rest and 45-1/2" long when fully extended.
- Welded nickel plated rings are 2" in diameter. Non-rust manganese bronze 225 snap is 4-1/4" long.
- Not intended for breakaway.
- Orange
-
Shembiner The new CMI Shembiner is a versatile piece that can be used on your arborist saddle, climbing harness or just stick one on your belt to hang a water bottle. The uses are endless! Shembiner XL The New Shembiner XL is a lightweight aluminum hook that attaches to your harness which is wide enough for your chainsaw handle to fit inside the hook itself. That allows the climber to quickly and easily remove and rack chainsaws and tools without having to fiddle around with a gate. Another cool feature is an extra hole so you can attach a chainsaw lanyard directly to the Shembiner XL, or to carry more gear. -
The Vault is a secure and durable tool holder that can be used on everything from harnesses and kit bags to vehicles. The two part aluminium alloy Vault is secured using a stainless steel bolt and is the ideal solution for gear storage, organisation and transportation. The locking gate provides even greater security for your kit by preventing accidental opening.- Strong, safe and secure
- One handed operation for ease of use
- Top ‘shelf’ allows in situ gear selection
- Low nose profile minimises hook-ups
- Can be set to either the unlocked or locked position
- Max webbing size: 45 x 3mm
- WLL 0.3kN - Not PPE
- User installable - flat bladed screwdriver required
-
SEQUOIA® Tree care seat harness for doubled-rope ascent techniquesDetailed description
- Built for comfort: - Semi-rigid, wide waistbelt and leg loops for excellent positioning; sculpted and lined with foam padding for comfort during suspension - Two gated attachment points allow the user to easily connect a ZILLON or MICROFLIP lanyard, or to install several attachment bridges (fixed or adjustable) and accessories directly on the bridge (RING, SWIVEL) - Attachment bridge provides lateral mobility - Mobile side attachment points allow the user to follow the orientation of the lanyard during lateral movement
- Easy to adjust: - Waistbelt equipped with a FAST buckle for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves - Leg loops equipped with FAST LT PLUS buckles with a locking system that limits the risk of it involuntarily unfastening - DOUBLEBACK buckles for adjusting the height of the attachment bridge and allowing the arborist to position him/herself comfortably; the buckles have a plastic cover to help keep them locked
- Easy to carry and organize tools: - Nine pre-shaped equipment loops with protective sheath - Five slots for CARITOOL tool holder - Two retainers for a carabiner to hold a chainsaw or handsaw - Elastic band for attaching a first aid kit
- Seat may be attached to improve comfort during prolonged suspension
Specifications
- Attachment points: Attachment bridge, gated attachment points, side attachment points
- Certification(s): CE EN 358, CE EN 813, UKCA, EAC, GB 6095-2021: W.
- Material(s): Nylon, polyester, polyethylene, aluminum, steel
- Lighweight and breathable fabric
- Only weighs 3 lbs
- Back pad is contoured to alleviate rib constraints enhancing operator movement
- Rope bridge with improved Fast Buckles
-
Out of stock
The treeMOTION evo is our top climbing harness for all arborists with multiple bridge variations changed out as required. The combination of the new versatile performance features with the comfort and safety that you already know has evolved into the NEW treeMOTION evo.Specifications
New exchangeable double rope or simple webbing bridge- Knotted rope bridge
- Stitched rope bridge
- Webbing bridge
- Easey change between knotted and stitched bridge
- Anodised
- Stronger
- With protection against sawdust
-
Setting the standard by which all industry saddles will be compared, this premium saddle's ultra-comfortable design is packed with high-performing features- The preferred choice of arborists and rock climbers, the rope that constructs our double rope suspension bridge offers the perfect combination of durability and function
- Suspension bridge features a diamond knot at one end and a girth hitch on the other for replacability and security.
- Suspension bridge is constructed with Endura Braid™ rope from New England Ropes.
- White core within the black and orange suspension bridge makes wear readily visible at a glance, allowing for additional wear inspection.
- Lightweight black anodized rigging plates provide multiple attachment points, giving added flexibility to arborists.
- Enhanced extra wide back pad extends further forward on hips, giving you amazing comfort and support.
- The 4" wide leg pads and extra wide 7" back are constructed from memory foam that conforms to the legs and back, reduces pressure points, wicks away moisture and does not retain heat for cool, comfortable performance.
- Leg straps and bridge are replaceable.
- Features adjustable accessory leg straps that keep your memory foam leg pads positioned for maximum comfort.
- Roller buckle at waist helps reduce wear to waist belt and offers easy adjustment.
- Two nylon utility straps with a chrome brass 200 snap and a 2" nickel plated ring keep tools close at hand.
- Dees at front and back offer easy attachment of suspenders (08-98122, sold separately).
- Spaces at each hip for the convenient attachment of carabiners.
- Snap in with just one hand with the fixed position, angled side dee rings!
- Not to be used for fall arrest.
- Weighs approximately 6.8 lbs. (medium size).
- Available in small, medium, large and extra large sizes
- Important: Only authorized replacement parts from Weaver Arborist should be used on this saddle. The use of unauthorized replacement parts will void Weaver Arborist's Warranty.
-
Out of stock
One of our most comfortable saddle options,this saddle easily maneuvers and comes with one floating dee- Floating dees provide more freedom of movement.
- Dees are made from forged aluminum with a black anodized finish that’s lighter weight than steel.
- Fixed position, angled side dee rings feature a two bar design and offer easy access — you can snap in with just one hand!
- Saddle backs feature two rounded nylon loops that are covered with clear rubber tubes that help resist excess wear. Each loop will hold up to 15 lbs. of accessories.
- Two additional dees are located at the bottom of the waist back for attachment of one of our ditty bag options or a first aid kit.
- Feature adjustable accessory leg straps that keep your padded leg straps positioned for optimum comfort.
- Front strap is reinforced with neoprene for extra durability.
- Extra wide 6" rubberized belting back helps provide firm support.
- Waist back is foam filled and lined with soft oil tanned top grain steer hide leather for added comfort.
- Features a loop for holding carabiners and two nylon utility straps with a chrome brass 200 snap and a 2" nickel plated ring keep to tools close at hand.
- The 2" nylon leg straps feature slip-on, foam filled, leather lined pads for extra comfort.
- Dees at front and back offer easy attachment of suspenders (08-98122, sold separately).
- Not to be used for fall arrest.
- Weigh approximately 6 lbs. (medium size).
- Available in small, medium, large and extra large sizes.
