- Integrated RFID chip for simplified operational documentation
- Steel inserts on the abrasion-prone areas increase service life
- Precision operation of the lever at minimum exertion
- Short lever and compact design prevent entanglement
- Automatic parking position of the control lever
- Ergonomic lever with rubber-coated grip inserts for intuitive handling with the left or right hand in active and passive applications
- Four-way safety lock allows inserting the rope without having to separate the device from the karabiner
- Large karabiner hole allows 360° rotation of the karabiner
- Anti-panic function reduces the risk of uncontrolled descent movements and creates additional operating options
- Interlocking bolt supplied with the lever allows use as a closed system
- Descent of heavy loads of up to 200 kg
- For a rope diameter of 8.9 to 11.8 mm
- Meets the standards EN 12841-C, EN 341-2A, EN 15151-1/8 and ANSI/ASSE Z359.4
-
MEGAWATT is a universal descender device for industrial climbers and rescue operations with a payload of up to 200 kg. The intelligent transmission mechanics of the descent lever facilitate a large operating range and exact adjustment of the speed at minimum force. -
Description
Our best selling carabiner has been scaled down to create the ultimate accessory connector. Oval carabiners are a technological challenge because of their shape – the load is shared equally between the spine and gate sides of the carabiner, which typically results in lower strength ratings. With our hot forging process, we are able to compensate by shifting material and putting aluminum where it needs to be to reinforce the frame to achieve and impressive 4kN rating. The oval allows for proper orientation and helps to limit load shifting while in use. The Micro Raider is perfect for throwline use, a direct connection from your chest harness to tend a climbing system, mounting a handsaw, and any other non-PPE function you can think of. Weight: 12 g Gate Opening: .5 in / 12.5 mm Length: 2.2 in / 58 mm Width: 1.3 in / 33 mm Major Axis Strength: 4 kN / 899 lbf NOT FOR PPE -
Accessory for fixing headphones (noise reduction or radio), consisting of a pair of sturdy nylon plates that can be fixed using the supplied screws through the holes on the shell of MOUSE helmets. Snap engagement of the headphones, allows the assembly of most of the headphones on the market. High quality product, made in Italy! -
Out of stock
All-round tree care tool The multiSLING is regarded as the number one multipurpose tool for professional arborists. It is suited for various applications in tree care. It can be used as an anchor sling and a hitch cord, in single leg or choked configurations. In combination with a Revolver carabiner from DMM, our multiSLING also serves as a good cambium saver. -
Friction saver for tree care that is easily retrievable from the ground, with an integrated pulley and a strap with different adjustment positions Designed for tree care, the NAJA friction saver allows the work rope to be set up without damaging the tree. The strap has four different adjustment positions to adapt to different branch diameters. Rope ascents and movement in the tree are optimized due to the high-efficiency pulley which facilitates rope glide at the anchor. The included retrieval ball makes the system easily retrievable from the ground. Detailed description Adjustable friction saver allows the work rope to be set up without harming the tree: - Strap has four different adjustment positions to adapt to different branch diameters - Special design helps protect the tree - Comes with 1.5 m replaceable, high-visibility yellow strap that can be connected to another 1.5 or 2.5 m strap to lengthen the friction saver and enable work on larger trees - Easy to install the rope and clip it into the MINO accessory carabiner for retrieval - Recommended for use on doubled rope (DdRT/MRS); the system may also be used on a single rope (SRT/SRS) (more information in the Instructions for Use) (1) Optimal efficiency: - The integrated high-efficiency pulley optimizes rope glide at the anchor - Two-person use is possible for carrying out a rescue System is easily retrievable from the ground: - 21 mm black retrieval ball, specially designed for the NAJA friction saver, for easy retrieval from the ground - Once the rope has passed through the pulley, the system can be retrieved when the retrieval ball becomes blocked in the MINO accessory carabiner - Strap and slots are slim to reduce the risk of getting the friction saver stuck in the tree The NAJA friction saver allows the user to work in compliance with the ANSI Z133 standard Specifications- Breaking strength: 25 kN
- Maximum load: 250 kg
- Certification(s): CE EN 795 B, CE EN 12278, UKCA, TS 16415
- Material(s): Aluminum, stainless steel, nylon, polyester
- Weight: 400 g
- Min. rope diameter: 11 mm
- Max. rope diameter: 13 mm
- Sheave type: Sealed ball bearings
- Sheave diameter: 18 mm
- Efficiency: 91 %
-
Out of stock
We are proud to introduce the NESSIE, an innovative solution to lanyard management challenges. Featuring four flexible fins designed to effortlessly clip loops of climbing line (max. ø13mm/ 1/2" rope). This durable NESSIE allows for convenient partial or complete rope storage at all times. The NESSIE is crafted with intentional features throughout its design. At the base, you will find an attachment aperture that ensures the secure fastening of your lanyard tail and spare gear. Additionally, the head of the NESSIE serves a dual purpose- it can hold your lanyard connector when not in use and neatly tuck a climbing line out of your workspace. The construction has passed thorough extensive durability testing, including temperature testing, confirming its suitability for use at temperatures ranging from -20°C to 45°C. Years of field-based development have led to the optimization of the NESSIE. The NESSIE offers an intuitive alternative to other lanyard management devices, which rely on traditional daisy-chains.
Technical Information
Rope diameter range (mm)Max. 13mm (1/2") (SWL) Safe Working Load (kg)10 (SWL) Safe Working Load (lbs)22 Weight (grams)52 Weight (ounces)1.8
-
Detailed description
- Lightweight, ergonomic design: - Anatomical design is close-fitting yet allows optimal freedom of movement - Textile sternal attachment point, lightweight and abrasion resistant - Anodized aluminum dorsal attachment point for great durability - Textile dorsal attachment point for attaching a self-retracting fall-arrest system - Padded shoulder straps are widely spaced to reduce neck chafing - Allows installation of a LIFT spreader for descending in an upright position
- Quick-donning and easy to use: - Harness dons with both feet on the ground using FAST LT PLUS buckles on the leg loops and sternal strap; these make it quick and easy to fasten and unfasten without loss of adjustment, even with gloves, and the unlocking system limits the risk of accidental unfastening - Shoulder straps equipped with self-locking DOUBLEBACK buckles for quick and easy adjustment - Two equipment loops and two slots for TOOLBAG tool pouch, for easy tool access - Stowing system for the MGO connectors on fall-arrest lanyards are located on each shoulder strap; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed
- The international version has a fall indicator: a red strap appears after a fall on the sternal or dorsal attachment point to indicate that the harness should be retired
Specifications
- Sternal attachment point: Fall-arrest system attachment
- Metal dorsal attachment point: For attaching a fall-arrest system
- Textile dorsal attachment point: For attaching a self-retracting fall-arrest system
- Certification(s): CE EN 361, EAC, ANSI Z359.11, CSA Z259.10, UKCA, JSFAD, GB 6095-2021: Z, XF 494-2004: FZL-DD-III
- Material(s): Nylon, polyester, aluminum, steel
SKUs
SKUs C073DA01 C073DA02 C073IA00 C073IA01 Color(s) Black/Yellow Black/Yellow Black Black Size 1 2 1 2 Waist belt 70-93 cm 83-120 cm 70-93 cm 83-120 cm Leg loops 47-62 cm 50-65 cm 47-62 cm 50-65 cm Stature 165-185 cm 175-200 cm 165-185 cm 175-200 cm Weight 1355 g 1395 g 1355 g 1395 g Guarantee 3 years 3 years 3 years 3 years Inner Pack Count 1 1 -
The Glide Rope Grab is a cam based horizontal and vertical work positioning lanyard adjuster. It features an intuitive, one-handed operation with a responsive rope payout and take up. The smooth, non-aggressive clutch is adjustable under load, with virtually no sit-back during use. The Glide comes with a size-specific removable cam, which allows for optimal rope tension through 3 friction settings so it can be used on ropes ranging from 11-13 mm or with wire-core lanyards. No additional cams are needed.- 11 mm to 13 mm diameter rope capacity
- Size specific removable cam allows optimal rope tension and adjustments including wire-core lanyards
- Adjustable under load
- Swivel eye prevents rope twisting
- Smooth non-aggressive clutch prevents rope damage
- No additional cams needed
- Virtual no sit back during use
- Intuitive design with ergonomic feel
- Individually serialized
- Meets ASTM F887 Standard
- Glide is CE Certified to Technical Specification No. 64055/2022
- CE certification only covers climbing rope not wire core rope
-
The ultimate climbing device: smooth operation and tool-free adjustment. The next generation in the Rope Runner seriesRope Runner Pro took the tree care industry by storm and quickly became one of the best selling climbing devices of all time. Now, the product team at Notch partnered with Kevin Bingham to bring you the Rope Runner Vertec: a new climbing and work positioning device that has the same performance you love, but with new features like tool-free adjustability, more friction settings to find the perfect fit, midline attachability without the need for slic pins, and an intuitive design for smooth descents. The Vertec is truly the next generation of the Rope Runner series.- On-the-fly tool-free friction adjustments for efficiency in the canopy
- Unmatched SRS climbing
- Easy setup for MRS climbing
- 7 friction settings for the perfect fit on your rope
- Integrated tending point for attachment to your chest harness, compatible with Notch Magneato
- Mid-line attachable without slic pins
- Designed in collaboration with Kevin Bingham
- Scannable enabled for track and trace capability using a data matrix
- Compatible with Ropes 11-12.9 mm in diameter
- CE Certified, conforms to regulation (EU) 2016/425
- SKU: 99703W
- UPC: 810122891635
- WLL: 130kg
- Weight: 1lb | 16oz
- Length: 3.7” | 9.3cm
- Width: 1.9” | 4.8cm
- Height: 6.1” | 15.5cm
- Rope compatibility: 11-12.9mm
- Materials: Aluminum Alloy / Stainless Country of Manufacture: Taiwan
- Replacement parts:
- Friction Body Kit (99704)
- Upper Bollard (99705)
-
Ocean Polyester's combination of Aramid and Polyester, ensures heat tolerance, and good grip. It come with 2 sewn eyes or 2 spliced eyes. -
Out of stock
Ocean Polyester's combination of Aramid and Polyester, ensures heat tolerance, and good grip. Comes with 2 spliced eyes or 2 sewn eyes. -
The lightweight OK carabiner is made of aluminum. It has an oval shape that allows optimal loading of devices with a wide cross-section, such as pulleys, rope clamps and mobile fall arresters. Its fluid interior design and Keylock system facilitate handling. It is available in three locking systems: automatic TRIACT-LOCK or BALL-LOCK system, or the manual SCREW-LOCK system. OK can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.Description
- Symmetrical oval shape allows optimal loading of devices with a wide cross-section, such as pulleys, rope clamps and mobile fall arresters
- Aluminum carabiner whose light weight reduces the weight of equipment the worker at height needs to carry
- May be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to keep it integrated with the device, and to limit the risk of it flipping
- Easier handling: - fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner - Keylock system to avoid any involuntary snagging of the carabiner
- H cross-section: - ensures an optimal strength/weight ratio - protects markings from abrasion
- Available in three different locking systems: - TRIACT-LOCK: automatic locking with triple-action gate opening - BALL-LOCK: automatic locking with triple-action gate opening, with lock indicator - SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked
- Also available in black (TRIACT-LOCK and SCREW-LOCK)
Specifications
- Material(s): aluminum
- Certification(s): CE EN 362, EA
