-
The Phlotich Pulley is a multi-aperture device specifically designed for SRT and DdRT. The new Phlotich Pulley is available fitted with bushings or bearings. -
Ideal for Arborist rigging where two independent tie-ins are required. Purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and aluminum axle.- MBS: 7000lbs
- Rope Capacity: 1/2"
- Size: 2.75x2.75in
- Weight .2lb
-
Ideal for Arborist rigging where three independent tie-ins are required. One orange, one black anodized aluminum sideplates, 1 1/4" aluminum sheave, bronze bushing, and aluminum axle. The new CMI Tri Tie pulley is built to work. The anodized side plates are made of 7075-T6 aluminum. 7000 series alloys are some of the highest rated strength alloys available today and are used in high performance app lications such as aircraft, aerospace, and competitive sporting equipment. MBS: 7000lbs -
Rescue model. Purple anodized aluminum sideplates, 1 1/4" aluminum sheave, bushing, and aluminum axle.- MBS: 7,000 lbs
- SWL: 1,400 lbs
- Sheave Diameter: 1.25”
- Max Rope Diameter: 1/2”
- Weight: 2.5oz
- Body material: Anodized Aluminum
- Sheave Mechanics: Oilite Bronze Bushing
- Sheave Material: Aluminum
- Width: 1.6250”
- Height: 2.75”
- Depth: .946” sideplate to sideplate
-
Features- Hot forged aluminium side plates provide strength and durability
- Heat treated stainless steel spindles for high strength and corrosion resistance
- Textile friendly surfaces
- Riveted and tamperproof assembly
- Pre lubricated sintered bronze bearings for ultra smooth operation
- Recommended for aborist, rescue, hauling and many applications where friction reduction is required
- Load bearing beckett
- Conforms to the following standards: EN 12278:2007 and NFPA 1983(06 ED ) Type G
-
Out of stock
Features- Triple attachment points for special rigging applications
- Hot forged aluminium side plates provide strength and durability
- Textile friendly surfaces
- Heat treated stainless steel spindles for high strength and corrosion resistance
- Pre lubricated sintered bronze bearings for ultra smooth operation
- Riveted and tamperproof assembly
- Recommended for arborist and rescue applications
- Conforms to the following standards: EN 12278:2007 and NFPA 1983(06 ED ) Type L
-
- 110 Spacer is Compatible with DMM Pinto Pulley
- 120 Rig Spacer is Compatible with DMM Pinto Rig Pulley
-
The RP037 Micro Pulley has a 12kN Rated Bridge- Compatible with rope diameter (mm) max 13mm (1/2")
- (MBS) Minimum Breaking Strength (kN) 28
- (MBS) Minimum Breaking Strength (lbf) 6295
- Wheel material Aluminium
- Finish Anodised
- Colour Red
- Weight (grams) 90
- Weight (ounces) 3
-
Out of stock
As the name suggests, the RopeGuide TwinLine innovation are two lines o rather ropes: Either a short, spliced ART rope (SpliceAnchor) with open eye in different lengths (up to 4,5 m) or a long rope according to EN 1891 (10 to 12 mm diameter) without termination in any lengths can be used as anchoring rope. The short rope system is well-tried. Certified to EN 795 B (temporary anchor), CEN/TS 16415:2013 (can be used simultaneously by two persons ) and in accordance with EN 355:2002 (Energy absorber). RopeGuide TwinLine features: • patented • mobile anchor • integrated ZipAbsorber (shock absorber) • it is possible to install and remove the long rope system from the ground • can be used optionally with spliced, short ART rope or long anchor rope (Ø 10 und 12 mm) according to EN 1891 • long rope system: anchor rope can be used as ascent rope or for rapelling • approved to be used by two persons simultaneously for ascent or work • certified to EN 795 B, CEN/TS 16415:2013 and in accordance with EN 355:2002 • body and parts are made of aluminium machined in the solid • super smooth rope feed thanks to Cocoon • continuously adjustable length • Trapeze 4 shackle • easy pulling of the long rope while changing anchor points thanks of the Ally pulley (no PPE) • automatic blocking of the adjustment unit without loss of distance • easy lifting and shifting of the adjustment device even after heavy load • easy lifting of the climbing / ascent rope • optimal “choking” mode (choking to the trunk) • minimum breaking strength: 18 kN • max. service life: 10 years for all metal parts and 5 years for all textile parts -
Finally, a pulley as unique as our customers. Due to the dual tone finishing process, no two pulleys will ever have the exact same anodized finish. Octavia is a climbing system pulley designed specifically for applications that require multiple connection points. Octavia’s tight tolerances and smooth bearings create a pulley of unmatched quality.- Hot forged side plates for maximum strength and durability
- Highly efficient sealed ball bearings
- Stout side plates to better tend hitches
- Riveted and tamperproof assembly
- Well suited for MRS climbing systems, lanyards, and more
FROM THE FIELD:
“Octavia’s tight tolerances, and smooth bearings create a pulley of unmatched quality.”
“Wow the pulley is so crazy smooth! It tended slack on my hitch like it was a mechanical!!!” “Finally, a reason to go back to MRS!”Item Number— OPPLOCTA
Weight— 5.85 oz /166 gm
Length— 3.70 in / 94 mm
Width— 2.71 in / 69 mm
Depth— 1.22 in /31 mm
For use with ropes— 8-14 mm
MBS— 32 kN
Find It Fast
Find It Fast
Our Location & Working Hours
© 2024, Endor’s Arborist & Rope Supply LLC.
